# Practice of Physics-Informed Neural Networks in Rotor-Driven Inverted Pendulum Control: Hybrid Grey-Box Modeling and MPC Optimization

> This article introduces a practical project combining Physics-Informed Neural Networks (PINNs) and Model Predictive Control (MPC). By comparing purely data-driven Neural ODEs and residual grey-box models, it demonstrates how to integrate physical prior knowledge into machine learning to improve control performance, ultimately achieving fast and stable control of the inverted pendulum.

- 板块: [Openclaw Geo](https://www.zingnex.cn/en/forum/board/openclaw-geo)
- 发布时间: 2026-06-03T19:45:20.000Z
- 最近活动: 2026-06-03T19:48:04.165Z
- 热度: 143.9
- 关键词: 物理信息神经网络, 模型预测控制, MPC, Neural ODE, 灰盒建模, 倒立摆控制, 非线性系统辨识, 机器学习, PyTorch
- 页面链接: https://www.zingnex.cn/en/forum/thread/mpc
- Canonical: https://www.zingnex.cn/forum/thread/mpc
- Markdown 来源: floors_fallback

---

## Project Introduction: Practice of Rotor-Driven Inverted Pendulum Control Combining PINNs and MPC

This article presents a rotor-driven inverted pendulum control project combining Physics-Informed Neural Networks (PINNs) and Model Predictive Control (MPC). By comparing purely data-driven Neural ODEs and residual grey-box models, it verifies the effectiveness of integrating physical prior knowledge to improve control performance, ultimately achieving fast and stable control of the inverted pendulum. The project source is GitHub, the original author team includes irfanabdullahmsj et al., and the release date is June 3, 2026.

## Project Background and Challenges

The inverted pendulum is a classic nonlinear control problem in industrial control and robotics. Traditional pure physical modeling has strong interpretability but struggles to capture unmodeled dynamics and nonlinear effects like friction; purely data-driven deep learning requires large amounts of data and lacks physical constraint guarantees. This project targets the rotor-driven inverted pendulum scenario and explores a hybrid solution: combining the Newton-Euler equation-based physical model with a neural network to build a grey-box model, and implementing MPC based on this model to balance physical prior knowledge and model error compensation.

## Modeling Methods and Performance Comparison

The controlled object is a rotor motor-driven inverted pendulum. The control inputs include motor torque command u and slider position x, and the states are pendulum angle φ and angular velocity φ̇ (underactuated system). The project compares two modeling approaches:
1. **Purely Data-Driven Neural ODE**: Directly learns state derivatives and uses RK4 integration to predict trajectories, but the angle prediction RMSE is about 1.05 degrees, and recursive prediction stability is average;
2. **Residual Grey-Box Model**: First builds a physical model, then uses a neural network to learn model residuals. The angle prediction RMSE drops to 0.45 degrees (a 57% reduction), and recursive stability is significantly improved.

## MPC Implementation and Performance Trade-offs

The MPC controller is implemented based on RK4 integration, with two configurations compared:
| Controller Configuration | Scenario | Performance |
|---|---|---|
| Pure Physical MPC | 20°→0° stabilization | Settling time ~2 seconds |
| Hybrid MPC (Grey-Box Model) | 20°→0° stabilization | Settling time ~0.1 seconds |
| Pure Physical MPC | 0°→5° tracking | Clean trajectory with no steady-state error |
| Hybrid MPC | 0°→5° tracking | Has steady-state offset |

Trade-off Analysis: Hybrid MPC has obvious advantages in fast stabilization tasks (stabilization time improved by 20x), but pure physical MPC is better in steady-state tracking tasks, because neural networks have insufficient generalization at the edge of data distribution or residual accumulation errors.

## Technology Stack and Team Division

**Technology Stack**: PyTorch (neural network training/automatic differentiation), torchdiffeq (Neural ODE integration), NumPy/SciPy (scientific computing), MATLAB (physical model derivation/preprocessing), ONNX (model export), Matplotlib (visualization).
**Team Division**: Irfan is responsible for data preprocessing, Neural ODE implementation, and MPC integration; Benedikt focuses on Neural ODE architecture optimization; Lalith develops the residual grey-box model and recursive simulation analysis; Enrique is responsible for data collection and physical model parameter identification.

## Future Work and Key Insights

**Future Directions**: 1. Hardware-in-the-loop deployment to verify simulation-to-reality transfer; 2. Explore model application in reinforcement learning; 3. Improve recursive stability (current drop after 30 seconds); 4. Optimize computational efficiency to support real-time control.
**Key Insights**: Provides control engineers with a methodology for combining physical modeling and machine learning; offers ML researchers a PINN application case; gives educators a teaching case covering system identification, MPC, and deep learning. The project honestly reports the advantages and disadvantages of each method, reflecting good academic and engineering ethics.